Zalman CNPS 9500 – LED
Compatibilidad
CPU
1. Intel Pentium 4 : Socket 478/775
2. Intel Pentium D-Dual core : Socket 775
3. AMD Sempron/AMD64 : Socket 754/939/940
4. AMD Athlon 64 X2-Dual core : Socket 939
| Especificaciones | ||||
| ▀ FHS | ||||
| Dimensions | 85(L) X 112(W) X 125(H)mm | |||
| Weight | 530g | |||
| Base Material | Pure Copper, Aluminum | |||
| Dissipation Area | 3,698㎠ | |||
| Thermal Resistance | Silent Mode | 0.16 °C/W | Normal Mode | 0.12 °C/W |
| ▀ Fan | ||||
| Bearing Type | 2-Ball | |||
| Speed | Silent Mode | 1,350RPM ± 10 % | Low-noise Mode | 2,400RPM ± 10 % |
| Noise Level | Silent Mode | 18.0dB ± 10% | Low-noise Mode | 27.5dB ± 10% |
| ▀ FAN Speed Controller (FAN MATE 2) | ||||
| – Dimensions | : 70(L) x 26(W) x 26(H)mm | |||
| – Weight | : 20g | |||
| – Output Voltage | : 5V ~ 11V ± 2% | |||
| – Allowable Power | : 6W or lower | |||
| – Connector | : 3-Pin | |||
1. 100% copper heatsink with aerodynamically optimized «tunnel» design for maximum cooling
efficiency.
2. Innovative and patented, curved heatpipe design for a heat transfer capacity of up to 6 heatpipes
with the use of just 3.
3. Optimized heatsink layout for maximum cooling efficiency with minimal materials.
4. 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.
5. Ultra quiet CNPS 92mm opaque fan with blue LEDs.
6. Aerodynamically optimized heatsink for smoother airflow and minimal noise.
7. Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan speed.
Installation Requirements Install only on systems meeting the following conditions:
1. No interfering components (e.g. PSU, video card) within 56mm from the center of the CPU.
2. No interfering components (e.g. ODD) within 45mm from the center of the CPU.
3. Case cover must be at least 135mm away from the motherboard.
4. Cases with Air Guide must have the Air Guide Duct removed before installation.
El video de instalación del producto puede ser visto Aquí
Más información de su funcionamiento pueden verla en esta noticia que publicamos hace unos meses: https://www.madboxpc.com/contenido.php?id=381
775 Motherboard List
CNPS7700 Compatible Socket 775 Motherboard List
|
(1)No motherboard components with a height greater than 39mm (1.53inch), as well as the PSU, disk drives, VGA card, and RAM should be present within a 68mm (2.68inch) radius from the center of the CPU. (2)Distance between the side of socket 775 and the PSU must be at least 44mm.
¢º Compatible |
| * Required Gap
The minimum clearance between the motherboard
|
* Notice : The physical layout and specifications of motherboards may change.
| Compatible | ||
| Manufacturer | Model | * Required Gap |
| ABIT | IG-80 | 17.0mm |
| IG-81 | 17.0mm | |
| Albatron | PM915G PRO | 10.0mm |
| PX865PE7C PRO | 6.0mm | |
| PX915G | 6.0mm | |
| PX915G PRO | 6.0mm | |
| PX915GC Pro-G | 7.0mm | |
| PX915GD PRO II | 6.0mm | |
| PX915P | 7.0mm | |
| PX915P PRO | 6.5mm | |
| PX915PC PRO-G | 6.5mm | |
| PX915PD PRO II | 6.5mm | |
| PX925X PRO | 15.5mm | |
| PX925X PRO-R | 15.5mm | |
| PX925XE PRO | 15.5mm | |
| PX925XE PRO-R | 15.5mm | |
| AOpen | i865Gm-7N | 14.0mm |
| i865PEa-7IF | 1.5mm | |
| i915Ga-E | 9.0mm | |
| i915Ga-EFRII | 13.0mm | |
| i915Ga-PLF | 13.0mm | |
| i915Gm-I | 17.0mm | |
| i915Pa-E | 9.5mm | |
| i915Pa-EFRII | 13.0mm | |
| i915Pa-PLF | 8.5mm | |
| s661FXm-7S | 18.0mm | |
| ASRock | 775i65GV | 14.0mm |
| 775S61 | 13.5mm | |